Planet FGSW-1822VHP 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch z wyświetlaczem LCD PoE (300W)
Efektyne, płacalne rozwiązanie dla urządzeń IP wymagających zasilanie PoE
PLANET FGSW-1822VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.
The FGSW-1822VHP is equipped with 16 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-1822VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks. |
| |
|
|
| |
Monitor LCD - Wykorzystanie PoE w czasie rzeczywistym i monitorowanie stany
Monitor LCD zainstalowany w FGSW-18822VHP wyraźnie pokazuje ładowanie PoE dla każdego portu, całkowite zużycie energii oraz stan systemu PoE - przeciążenia, niskie napięcia i wysokie temperatury. Użytkownik jest w stanie uzyskać szczegółowe informacje na temat czasu rzeczywistego PoE bezpośrednio za pomocą urządzenia. Ponadto funkcja Power Control Budżet pomaga zapobiegać przeciążeniu budżetu mocy. |
| |
|
|
| |
802.3at PoE+ Power and VLAN Isolation Operation Mode
The built-in solid DIP switch provides "Standard" and "VLAN" operation modes. The FGSW-1822VHP operates as a normal IEEE 802.at/af PoE Switch in the "Standard" operation mode. The "VLAN" operation mode features with port-based VLAN function that can help to prevent the IP camera's multicast or broadcast storm from influencing each other. |
| |
|
|
| |
Flexible and Extendable Two Gigabit Uplink Solution
The FGSW-1822VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.
Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. |
| |
Robust Protection
The FGSW-1822VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users' networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. |
| |
Easy Installation and Cable Connection
As data transfer and high power PoE are transmitted over a cable, the FGSW-1822VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-1822VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables. |
| |
|
| Ordering Information |
| FGSW-1822VHP |
16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch |
| Hardware Specifications |
| 802.3af/802.3at PoE Injector Port |
16 |
| 10/100BASE-TX MDI/MDIX Ports |
16 |
| 10/100/1000BASE-T MDI/MDIX Ports |
2 (Combo Port) |
| 1000BASE-X SFP/mini-GBIC Slots |
2 (Combo Port) |
| DIP Switch |
1 for standard mode/VLAN mode operation |
| Switch Architecture |
Store-and-Forward |
| Switch Fabric |
7.2Gbps/non-blocking |
| Switch Throughput@64 bytes |
5.35Mpps@64bytes |
| MAC Address Table |
4K entries |
| Maximum Frame Size |
1536 bytes |
| Flow Control |
IEEE 802.3x pause frame for full-duplex; back pressure for half-duplex |
| LED |
System:
Power (Green)
10/100BASE-TX RJ45 Interfaces:
10/100Mbps LNK/ACT (Green)
PoE-in-Use (Orange)
10/100/1000BASE-T RJ45/SFP Interfaces:
LNK/ACT (Green)
100/1000 (Green) |
| LCD Monitor |
■ Total PoE budget
■ Total PoE usage
■ Per port PoE usage
■ PD light load protection/PD over load protection
■ Short-circuit protection(SCP)
■ Low voltage alarm, high voltage alarm
Refresh PoE status display every 10 seconds |
| Dimensions (W x D x H) |
233 x 440 x 44 mm (1U height) |
| Enclosure |
Metal |
| Weight |
3.2kg |
| Power Requirements |
AC 100~240V, 50/60Hz, 5A max. |
| Power Consumption/Dissipation |
Max. 330 watts/1125 BTU |
| Thermal Fan |
2 |
| ESD Protection |
Contact Discharge of ±4KV DC
Air Discharge of ±6KV DC |
| Surge Immunity |
±4KV |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type |
End-span |
| PoE Power Output |
Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at) |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
300 watts |
| Max. Number of Class 2 PDs |
16 |
| Max. Number of Class 3 PDs |
16 |
| Max. Number of Class 4 PDs |
11 |
| Standards Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus |
| Environment |
| Operating |
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
|
| Ordering Information |
| FGSW-1822VHP |
16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch |
Gwarancja: 2 lata
